This page is on a secure connection, protected by GeoTrust® SSL

MSD752 Microstepping Drive

MSD752 Microstepping Drive
Our Average Customer Rating
£69.90 (£83.88 inc tax)
35 In Stock

Product Description

MSD752 Stepper Drive: 70VDC Input, 5.2A

The MSD752 is a high performance microstepping driver based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features

  • High performance, cost-effective
  • Supply voltage up to +75 VDC
  • Output current up to 5.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current protections
  • CE and RoHS compliant

  • Application

    Suitable for a wide range of stepper motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, labelling machines, laser cutters, engraving machines, pick-place devices and so on. It is ideal for the applications where low noise, low heating, high speed and high precision are required.


    Notes: We recommend our MCP power supply SPS600-48 to go with this drive.

     

    Download PDF

    Return to top

    Related Items

    NEMA 23 (57mm) High Torque Stepper Motors
    NEMA 23 (57mm) High Torque Stepper Motors

    High torque NEMA 23 Hybrid Stepping Motors available with a holding torque up to 1.86Nm. More torque than standard hybrid stepping motors due to the use of powerful rare earth magnets

    NEMA 34 High Torque Stepper Motors
    NEMA 34 High Torque Stepper Motors

    The FL86STH series stepper motors are high torque, 1.8 degree hybrid stepper motors with a holding torque up to 12Nm.

    SK mounting Block for the SFC linear Rail
    SK mounting Block for the SFC linear Rail

    The SK range of mounting blocks for the SFC range of precision linear rails are available from 12 to 30mm bore from stock.

    MCP25 Breakout Board
    MCP25 Breakout Board

    The MCP CNC 25 Way D Breakout has many uses including CNC, retrofitting and robot control. It allows you to wire to the parallel port / LPT port using screw terminals, this makes wiring limit / sensing switches to you CNC machine a breeze.

    £25.00 (£30.00 inc tax)
    Return to top