This page is on a secure connection, protected by GeoTrust® SSL

NEMA 23 (60mm) High Torque Stepper Motors

NEMA 23 (60mm) High Torque Stepper Motors
Our Average Customer Rating
45 In Stock
30 In Stock
5 In Stock

Product Description

Nema 23 (60mm) High Torque Hybrid Stepper Motors

The M60STH series stepper motors are high torque, three-stack, size Nema 23, 1.8 degree hybrid stepper motors with a holding torque up to 4Nm.

Specifications:

Step Angle 1.8 Deg
Step Angle Accuracy +/-5% (full step, no load)
Resistance Accuracy +/-10%
Inductance Accuracy +/-20%
Temperature Rise 80 ºC Max. (rated current,2 phase on)
Ambient Temperature -20 ºC ~ +50 ºC
Insulation Resistance 100 MOhms Min., 500VDC
Dielectric Strength 500VAC for one minute
Shaft Radial Play 0.02Max. (450 g-load)
Shaft Axial Play 0.08Max. (450 g-load)
radial force 75N (20mm from the flange)
Max. axial force 15N
Rotation CW (viewed from front flange)

 

Model No.
Voltage
Current
(phase)
Inductance
(Phase)
Holding
Torque
Shaft
Version
Datasheet
V
A
mH
Nm
M60STH88-3008DF
5.46
2.1
12.8
3
Double
M60STH100-4004S
2.8
4.0
3
4
Single

* All technical data above are based on Bipolar connection. For complete technical specifications, please refer to each model's datasheet

Return to top

Related Items

MSD880 High Performance Microstepping Drive
MSD880 High Performance Microstepping Drive

As a replacement model to our old MSD980, MSD880 is a high performance microstepping drive based on pure-sinusoidal current control technology and the self-adjustment technology, with 80VDC inputs and 7.8A output current.

£81.95 (£98.34 inc tax)
Gearboxes
Gearboxes

These are a selection of MCP2, MCP4 wormwheel gearboxes, spur gearboxes and Planetary gearboxes that are surplus

£100.00 (£120.00 inc tax)
SFC30 Precision round rail (30mm)
SFC30 Precision round rail (30mm)

SFC30 Precision round rail (Induction Hardened)

TBR16UU Open Pillow Block
TBR16UU Open Pillow Block

TBR16UU Open Linear Slide Unit The TBR16UU pillow block is an open linear bearing installed in a small and light aluminum case, making it easy to install and mount to. The slide unit has been optimised to be used with the TBR16 range of supported prec

£8.88 (£10.66 inc tax) Out of stock
TBR16 Supported round Rail
TBR16 Supported round Rail

The ZPTBR16 Supported round Rail is a precision sliding rail with an aluminium mounting over the full length of stroke preventing deflexions.

MSD752E Microstepping Drive
MSD752E Microstepping Drive

The MSD752E is a high performance microstepping drive based on latest 32 DSP technology, with supply voltage up to +70 VDC and current of 5.2A.

£69.90 (£83.88 inc tax)
Regulated Switch-mode Power Supplies
Regulated Switch-mode Power Supplies

RSP-320 and SPS series switching mode power supplies with universal AC input /full range of 85-264VAC to provide 24V/ 36V/ 48V/ 65VDC output voltage for the output current 0-12.5A.

MSD542 Microstepping Drive
MSD542 Microstepping Drive

The MSD542 stepper drive with 50VDC input and 4.1A is suitable for a wide range of stepping motors including our FL42, 57, 86 and the FL110 and are ideal for any application that requires a High performance but very low cost Microstepping drive.

£54.50 (£65.40 inc tax)
EM Digital Stepper Drives
EM Digital Stepper Drives

By implementing the latest motion control technologies, our new EM series, DSP-based digital stepper drives deliver excellent performance better than ever before: Unique features of sensorless stall detection, anti-resonance, extra smoothness and more...

DM805-AI Digital Stepper Drive With Analogue Input
DM805-AI Digital Stepper Drive With Analogue Input

Motion Control Products Ltd’s digital stepper drive DM805-AI is a digital stepper drive with built-in oscillator, featured in supporting 0-5V analogue signal for speed controls. The drive calculates its own natural system frequency and applies a damping c

£103.90 (£124.68 inc tax)
DMD870 Digital Stepper Drive
DMD870 Digital Stepper Drive

Motion Control Products Ltd’s digital stepper drive DMD870 / DM870 is a digital stepper drive using a DSP with advanced control algorithm. It supports input voltage of 72VDC with output current (programmable) from 0.5A to 7.0A (5.0RMS).

£107.50 (£129.00 inc tax)
Return to top