This page is on a secure connection, protected by GeoTrust® SSL

MSD752E Microstepping Drive

MSD752E Microstepping Drive
38 In Stock
Motion Control Products Ltd Motion Control Products Ltd branded products
£69.90 (£83.88 inc tax)
Secure ordering via SagePay & PayPal
Fast delivery from UK stock

MSD752E Stepper Drive: 70VDC Input, 5.2A

The MSD752E is a high performance microstepping driver based on the latest DSP technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features

  • High performance, cost-effective
  • Supply voltage up to +70 VDC
  • Output current up to 5.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current protections
  • CE and RoHS compliant

  • Application

    Suitable for a wide range of stepper motors, from NEMA size 17 to 34. It can be used in various kinds of machines, such as X-Y tables, labelling machines, laser cutters, engraving machines, pick-place devices and so on. It is ideal for the applications where low noise, low heating, high speed and high precision are required.


    Notes: We recommend our MCP power supply RSP-320-48 to go with this drive.

     

    Download Datasheet MSD752E

    NEMA 23 (57mm) High Torque Stepper Motors

    NEMA 23 (57mm) High Torque Stepper Motors

    High torque NEMA 23 Hybrid Stepping Motors available with a holding torque up to 1.86Nm. More torque than standard hybrid stepping motors due to the use of powerful rare earth magnets

    10 In Stock
    2 In Stock
    5 In Stock
    20 In Stock
    89 In Stock
    15 In Stock
    22 In Stock
    Regulated Switch-mode Power Supplies

    Regulated Switch-mode Power Supplies

    RSP-320 and SPS series switching mode power supplies with universal AC input /full range of 85-264VAC to provide 24V/ 36V/ 48V/ 65VDC output voltage for the output current 0-12.5A.

    6 In Stock
    28 In Stock
    8 In Stock
    4 In Stock
    26 In Stock
    NEMA 34 High Torque Stepper Motors

    NEMA 34 High Torque Stepper Motors

    The FL86STH series stepper motors are high torque, 1.8 degree hybrid stepper motors with a holding torque up to 12Nm.

    10 In Stock
    16 In Stock
    20 In Stock
    17 In Stock
    9 In Stock
    3 In Stock
    MCP25 Breakout Board

    MCP25 Breakout Board

    The MCP CNC 25 Way D Breakout has many uses including CNC, retrofitting and robot control. It allows you to wire to the parallel port / LPT port using screw terminals, this makes wiring limit / sensing switches to you CNC machine a breeze.

    £25.00 (£30.00 inc tax)
    8 In Stock