This page is on a secure connection, protected by GeoTrust® SSL

MSD880 High Performance Microstepping Drive

MSD880 High Performance Microstepping Drive
48 In Stock
£81.95 (£98.34 inc tax)
Secure ordering via SagePay & PayPal
Fast delivery from UK stock

MSD880 Stepper Drive (80VDC, 7.8A)

As a replacement model to our old MSD980, MSD880 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with reduced noise, lower heating, smoother movement and better performance at higher speed than most of the drives in the market. It is suitable for driving 2-phase and 4-phase hybrid stepper motors.

The MSD880 stepper drive is suitable for a wide range of stepping motors including our FL57, M60, FL86 and the FL110 and are ideal for any application that requires a high performance but very low cost Microstepping drive.

Features

  • Supply voltage up to +80VDC
  • Output current up to 7.8A
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Support PUL/DIR and CW/CCW modes
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Short-voltage, over-voltage and over-current protection
  • CE & RoHS compliant

 

Download PDF

NEMA 23 (60mm) High Torque Stepper Motors

NEMA 23 (60mm) High Torque Stepper Motors

The M60STH series stepper motors are high torque, three-stack, size Nema 23, 1.8 degree hybrid stepper motors with a holding torque up to 4Nm.

45 In Stock
30 In Stock
5 In Stock
Regulated Switch-mode Power Supplies

Regulated Switch-mode Power Supplies

RSP-320 and SPS series switching mode power supplies with universal AC input /full range of 85-264VAC to provide 24V/ 36V/ 48V/ 65VDC output voltage for the output current 0-12.5A.

6 In Stock
28 In Stock
8 In Stock
5 In Stock
26 In Stock
NEMA 34 High Torque Stepper Motors

NEMA 34 High Torque Stepper Motors

The FL86STH series stepper motors are high torque, 1.8 degree hybrid stepper motors with a holding torque up to 12Nm.

10 In Stock
16 In Stock
20 In Stock
17 In Stock
9 In Stock
3 In Stock