This page is on a secure connection, protected by Comodo® SSL

EM556-CAN Stepper Drive with CANOpen Control

EM556-CAN Stepper Drive with CANOpen Control
2 In Stock
£99.90 (£119.88 inc tax)
Secure ordering via SagePay & PayPal
Fast delivery from UK stock

EM556-CAN Stepper Drive (50VDC, 5.6A)

High Performance Stepper Drive with CANOpen communication

Motion Control Products Ltd (MCP)'s new EM556-CAN stepper drive is one of the new high performance stepper drive which can support CANOpen communication protocol. By implementing latest 32-bit DSP technology, this stepper drive is able to power 2 phase and 4 phase stepper motors. It can configure drive parameters and motor operation in real time via CANOpen commander. Especially in multi-axis linkage of applications, can greatly reduce the wiring, enhance the drive running reliability.

  • Power supply 20 to 50VDC, recommended 36VDC
  • Output current 0.1 to 5.6A (peak), default value 3.2A (peak)
  • Support CAN field bus control, meet CANOpen standard protocol of DS301 V4.02 and DSP 402 V2.01
  • Setting address and the baud rate via DIP switch
  • Operates in velocity, position or home mode
  • 3 opto-isolation differential digital inputs, max. frequency 20KHz, and wide input voltage +5 to 24VDC
  • 1 opto-isolation differential digital output, max. current 100mA, largest external pull-up voltage 24VDC
  • Protections for over-voltage and over-current etc.
  • CE marked and RoHS compliant

It is suitable for all kinds of small and medium-sized automation equipment and instrumentation which requires multi-axis linkage control: such as manipulator and packaging machines etc.

Electrical Specification (Tj = 25ºC/77ºF) 







Output Current




5.6 (4.0 RMS)

Supply voltage





Input signal current





Input signal voltage VDC 5 - 24

Over-voltage value





Isolation resistance





download button Download PDF MANUAL

Regulated Switch-mode Power Supplies

Regulated Switch-mode Power Supplies

RSP-320 and SPS series switching mode power supplies with universal AC input /full range of 85-264VAC to provide 24V/ 36V/ 48V/ 60VDC output voltage for the output current 0-12.5A.

17 In Stock
3 In Stock
4 In Stock
5 In Stock
NEMA 23 (60mm) High Torque Stepper Motors

NEMA 23 (60mm) High Torque Stepper Motors

The M60STH series stepper motors are high torque, three-stack, size Nema 23, 1.8 degree hybrid stepper motors with a holding torque up to 4Nm.

30 In Stock
30 In Stock
NEMA 23 (57mm) High Torque Stepper Motors

NEMA 23 (57mm) High Torque Stepper Motors

High torque NEMA 23 Hybrid Stepper Motors offers more torque than standard hybrid stepping motors due to the use of powerful rare earth magnets. Holding torque available up to 1.86Nm, with or without encoder option.

17 In Stock
43 In Stock
10 In Stock
30 In Stock
85 In Stock
20 In Stock
0 In Stock
5 In Stock
50 In Stock