This page is on a secure connection, protected by GeoTrust® SSL

ES-D808 8Nm Stepper Drive + Motor With Encoder

ES-D808 8Nm Stepper Drive + Motor With Encoder
2 In Stock
£280.50 (£336.60 inc tax)
Secure ordering via SagePay & PayPal
Fast delivery from UK stock

ES-D808 Series Closed-loop Stepper Drive + Motor System

(Drive+ Motor/Encoder: ES-D808 + ES-M23480)

 

Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this, loss of synchronisation can occur between commanded and actual steps. Monitoring position using an optical encoder can help but only highlights position loss rather than correcting it! An application requiring real-time, closed-loop performance throughout the move has previously required engineers to choose much higher cost/complexity servo systems which in many applications lack the high torque feature of stepper motors. Hence, expensive planetary gearboxes have to be added.

  

Our new ES86 series closed-loop stepper drives and motors system overcome this weakness by using high resolution encoders to update the motor position every 25 micro-seconds, ensuring controlled, real-time position accuracy without losing steps. Different from the constant current output of an open-loop stepper system, output current in ES stepper drives is optimised - changing based on load position.

 

FEATURES

  • No tuning required and easy to use
  • Close-loop control eliminating loss of steps
  • Stepper drive supply voltage from 30 to 80 Vdc with peak current of 8.2A
  • Programming with RS232
  • Broader operating range – higher torque and higher speed
  • Reduced motor heating and more efficient smooth motion and super-low motor noise
  • Do not need a high torque margin
  • Fast response, no delay and almost no settle time
  • High torque at starting and low speed, high stiffness at standstill
  • Matched 2-phase NEMA 34 motors with 8Nm or 4Nm holding torque
  • Internal incremental encoder  (1000 lines/rev) for accurate position control

  

STEPPER DRIVE SPECIFICATIONS

 

ES-D808 Drive 

Min

Typical

Max

Unit

Input Voltage

30

48

80

VDC

Output Current

0

-

8.2 (Peak)

A

Pulse Input Frequency

0

-

200

kHz

Logic Signal Current

7

10

16

mA

Isolation Resistance

500

-

-

 

MATCHING MOTOR M23480 SPECIFICATIONS

 

ES-D808 stepper drive can work with the three-phase hybrid stepper motors with encoder as below:


Motor Model No.

ES-M23440

ES-M23480

Step Angle (Degree) 

1.8

1.8

Holding Torque (N.m) 

4.0

8.0

Phase Current (A) 

5.5

6.0

Phase Resistance (Ohm) 

0.46

0.44

Phase Inductance (mH) 

4

3.73

Inertia (g.cm2) 

1500

2580

Weight (Kg) 

1.5

3.5

Encoder (lines / Rev.) 

1000

1000


We recommend to use our power supply SPS600-48 to power our ES-D808 series closed-loop stepper drives and motors system.


For more detailed information, please click the link below o download the complete technical datasheet.

ES86-datasheet-download


Please contact our sales team for pricing if you need the items for the quantity over 10pcs.

Regulated Switch-mode Power Supplies

Regulated Switch-mode Power Supplies

MF and SPS series switching mode power supplies with universal AC input /full range of 85-264VAC to provide 24V/ 36V/ 48V/ 65VDC output voltage for the output current 0-12.5A.

6 In Stock
28 In Stock
8 In Stock
0 In Stock
9 In Stock