The product is out of stock. If you would like us to contact you when it is available, please enter your email address below.
CSMIO/IP-S is a 6-axis motion controller. In combination with a PC and control software (Mach3, Mach4, CS-Lab) it’s an ideal system for CNC machines control. CSMIO/IP-S was designed for professionals, CNC automation manufacturers, retrofit specialists and hobbyists, who want to equip their machine tool with efficient, stable and flexible CNC control system for reasonable price.
Provided by connection with PC via Ethernet – its physical layer is galvanically isolated, used protocols provide reliable and fast transmission even through industrial environments). Practically any other interfaces do not provide continuity and reliability of transmission on such high-level as ETHERNET. That is why it is currently the worldwide standard for high-speed digital communication.
One of the biggest advantages of CSMIO/IP-S is simplicity of installation. It does not require any external electronics for correct operation. Inputs/outputs signals are optically isolated, filtered, protected against short circuit, overheating etc. All signals are adapted to industry 24V standard. The device is enclosed in a compact housing, mounted on a DIN-rail, what makes mechanical and electronic installation in a control cabinet takes less time and is even easier.
CSMIO/IP-S controller works with Mach3/ Mach4 software because of its low price, popularity and enormous capability to adapt to specific requirements. As for control signal, the choice is the popular step/direction (step/dir) standard. This way you can control both – stepper motor drives and the most modern servo drives. Thanks to frequency of stop signal that reaches to 4MHz you can take maximum advantage of stepper division in stepper motors the same reducing resonance and significantly improving the performance of a propulsion system. It also provides full advantage of encoders with a large number of pulses per rotation in servo drives, and the same lets you to achieve such precision and speed, which previously were unavailable in this price sector.
In short – control software (Mach3, Mach4) installed on a PC is the brain and CSMIO/IP-S controller is the heart of the entire control system. Control software (Mach3, Mach4) changes gcodes into motion trajectory and sends it through network connection to the CSMIO/IP-S. Basing on the trajectory the controller generates accurate step/dir signal for all axes. This division of tasks makes PC is less loaded than if using classic parallel LPT port.
You can extend CSMIO/IP-S features using the additional expansion modules:
The housing of the CSMIO/IP-S controller and all the expansion modules is adapted to DIN 35mm rail mounting.
PARAMETER |
CSMIO/IP-S |
CSMIO/IP-A |
CSMIO/IP-M |
Number of axes | 6 |
6 |
4 |
Digital inputs number |
32 |
24 |
12 |
Digital outputs number |
16 |
16 |
4 |
Relay outputs number |
– |
– |
2 |
Analog inputs number |
4 |
4 |
2 |
Analog outputs number |
2 |
6 (+/- 10V) |
2 |
Supply voltage |
24VDC +/-10% |
24VDC +/-10% |
24VDC +/-10% |
Power consumption |
5W |
5W |
5W |
Maximum voltage on in/out lines |
30VDC |
30VDC |
30VDC |
Maximum load of output line |
250mA |
250mA |
250mA |
Voltage range of analog inputs |
0-10VDC |
0-10VDC |
0-10VDC |
Maximum load of analog output |
5mA |
5mA |
5mA |
Axis drives control type |
Step/Direction (STEP/DIR) |
Analog |
Step/Direction (STEP/DIR) |
Maximum frequency of STEP signal |
4MHz |
– |
125kHz |
STEP signal fill factor |
50% |
– |
50% |
PC connection type |
Ethernet 10/100Mb |
Ethernet 10/100Mb |
Ethernet 10/100Mb |
Ambient temperature range |
0oC to +60oC |
0oC to +60oC |
0oC to +60oC |
Relative humidity (without condensation) |
10% – 95% |
10% – 95% |
10% – 95% |
CSMIO-MPG module support | ![]() |
![]() |
![]() |
CSMIO-IO module support | ![]() |
![]() |
![]() |
CSMIO-ENC module support | ![]() |
![]() |
![]() |
Backlash compensation | ![]() |
![]() |
![]() |
Homing on INDEX | ![]() |
![]() |
![]() |
Slave axes | ![]() |
![]() |
*basic ![]() |
THC analog mode | ![]() |
![]() |
![]() |
Spindle axis | ![]() |
![]() |
![]() |
#G32# threading | ![]() |
![]() |
![]() |
RIGID TAPPING | ![]() |
![]() |
![]() |
Closed Loop Spindle Control | ![]() |
![]() |
![]() |
Feedback | ![]() |
![]() |
![]() |
CSMIO/IP-A and CSMIO/IP-S support rigid tapping (sample video) and for that they require: